Standard Description
This power unit features a permanent magnet motor having a energy up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve using the decreasing speed managed through the pressure compensated flow management valve. Items of this series is often broadly utilized in the marketplace of logistic units such as fork lift, mini lift table, and so on.
Special Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic elements concerned before installation of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is advisable.
four. This electrical power unit is designed to be mounted vertically.
five. Check the oil degree while in the tank following the 1st star from the power unit.
six. Oil modifying is needed right after the first 100 operation hrs,afterwards after every single 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.