Observing a handful of rules for correct installation is essential for the dependable and appropriate operation on the gearbox or gear motor.
The guidelines set out listed below are intended as being a preliminary manual to picking gearbox or gear motor. For powerful and proper installation, stick to the directions given inside the set up, utilize the maintenances guide for your gearbox accessible from our sales department.
Following is really a quick outline of installation rules:
a) Fastening:
Spot gearbox on a surface providing sufficient rigidity. Mating surfaces ought to be machined and flat.
Mating surfaces should be within definite geometric tolerances (see guide). This is in particular real of flange-mounted gearboxes with splined hollow shafts.
In applications that involve higher radial loads at the output end, flange mounting is suggested for some gearbox sizes as this mounting makes use of the double pilot diameters offered in these gearboxes.
Make certain the gearbox is suitable for the required mounting place.
Use screws of resistance class eight.eight and more than to safe the gearbox. Torque up screws for the figures
indicated during the related tables.
With 
transmitted output torque higher than or equal 70% from the indicated M2max torque, and with
frequent movement reversals, use screws with minimum resistance 10.9.
Some gearbox sizes is usually fastened employing both screws or pins. Of pin seated during the frame the gearboxes be no less than one.5 occasions pin diameter.
b) Connections
Safe the connection elements to gearbox input and output. Never tap them with hammers or equivalent tools.
To insert these components, utilize the services screws and threaded holes offered on the shafts. Make sure to clean off any grease or protects through the shafts ahead of fitting any connection components.
Fitting hydraulic motors.
Be cautious the O ring among motor flange and gearbox input flange when assembling. Set up the
hydraulic motor prior to filling lube oil into the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit ought to be this kind of to make sure that brake is released instants just before gearbox begins and utilized right after gearbox has stopped. Test that stress in the hydraulic line for brake release is at zero each time gearbox is stopped.
Route of rotation
Motors are connected to your appropriate electric or hydraulic circuit in line with their course of rotation.
When executing these connections, keep in mind that all gearboxes, whether or not in the in-line or appropriate angle design, have the identical direction of rotation each at input and output. For much more particulars with the connection of electrical and hydraulic motors, see pertinent sections within this catalogue.
