We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Sort EPT Vertical Extended-shaft Pump
EPT :
Variety EPT vertical prolonged-shaft pump is a recently developed product with both homeland and overseas advanced experience in design and manufacture. It is used to provide obvious h2o, sewage with certain reliable particles (such as iron scrap, sand, coal powder and so on.) and sector squander h2o and seawater with corrosive. The temperature of liquid can not be above 80ºC. It is broadly employed in first drinking water works, squander drinking water manufacturing unit, metallurgy and steel (specially suitable for delivering oxygenation iron sheet drinking water), electrical power station,mine, civil task and farmland etc.
Nomenclature :
150LC3-90A-L
one hundred fifty-Outlet diameter of pump is 150mm
LC-Vertical prolonged-shaft pump
3- Impeller stage variety (No indication, when phase number is 1)
A-The minimize code of impeller
L-Submerged depth (L≤18m)
Variety of overall performance (Style stage) :
Potential: sixty~8400m3/h,
Head: twelve.5~ninety four.5m
Development attribute :
The type EPT vertical long-shaft pump is put in with single basis,its inlet is vertical downward and outlet is horizontal.The pump and the motor is immediately connected. The rotation of pump rotor is counter clockwise seeking from the motor to the pump, the main features are as following
one.It is wonderful made with hydraulic design and style computer software. It helps make impeller and EPT donning elements has a lengthy life due to the fact of anti-abrasive impeller and Diffusor. The pump is not only dependable, protected, constant but also saving strength.
2.There is filter in pump inlet with proper gap, this can not only stop impurity getting into pump to harm pump but also lower inlet loss and increase pump efficiency.
three.Impeller adopts stability hole to harmony axial pressure. There is replaceable seal ring in EPT and back go over board of impeller to shield impeller and pump.
four.Pump middle shaft, h2o column and guard pipe are multi-burl, middle shaft uses technology of sleeve coupling. Drinking water pipe can be a lot more or considerably less for diverse inundated depth according to user’s requirement. Impeller and Diffusor are multi-phase for different head.
5.Drinking water pipe is related by flange with guidebook bearing in its center. Pump guidebook bearing adopts ethene or thordon bearing, it can also adopt rubber ( when the temperature of liquid is over 55ºC).Shaft is secured by guard column, the manual bearing should be equipped with exterior cooling lubricating drinking water, while offering sewage.
six.The remaining axial power of pump and the fat of rotor elements is borne by via EPT bearing in motor seat or motor with thru EPT bearing. The thru EPT bearing is lubricated by dilute oil and cooled with exterior water. The via EPT bearing can have aspect for monitoring temperature.
seven.Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is handy to adju EPT axial place of impeller by nut in bearing areas higher stop or pump coupling.
eight.Pump can be geared up with controller which can automatically start off and quit pump in accordance to liquid level, give an alarm for more than loading and management several pumps in long-length. There is automatic exhau EPT technique for pump with diameter over 500mm.
Content:
Pumped Medium Content Sort Element Identify |
Distinct Water | Sewage | Seawater | |
Bell Mouth | HT250 | HT250 | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Impeller | HT250 | ZG1Cr13Ni1 ZG1Cr18Ni9 |
ZG00Cr17Ni14Mo2 | ZG00Cr17Ni14Mo2 |
Diffusor | HT250 | QT500-7 | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Water Column | Q235-A | Q235-A | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Discharge Elbow | Q235-A | Q235-A | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Guard Column | Q235-A | Q235-A | 1Cr18Ni9 | 00Cr17Ni14Mo2 |
Shaft | 452Cr13 | 452Cr13 | 1Cr18Ni9 | 1Cr18Ni9 |
Shaft Sleeve | 2Cr13 | 2Cr13 | 1Cr17Ni2 | 1Cr17Ni2 |
Xihu (We EPT Lake) Dis. Bearing | Filling in ethene or Thordon | |||
Xihu (We EPT Lake) Dis. Bearing Entire body | HT250 | HT250 | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Sealing Ring | HT250 | 2Cr13 | HT250Ni2Cr | ZG00Cr17Ni14Mo2 |
Adapter Coupling | 452Cr13 | 452Cr13 | 1Cr17Ni2 | 1Cr17Ni2 |
Coupling | HT250 | HT250 | HT250 | HT250 |
Motor Assist | Q235-A | Q235-A | Q235-A | Q235-A |
Remarks: EPT materia EPT can be employed in accordance user’s prerequisite.
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic equipment manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the detailed substitute elements contained herein are not sponsored, accepted, or created by the OEM.