Constrained Finish Float Spacer Style
The addition of plates restricts axial travel on the drive or driven shaft. The spacer tends to make it attainable to get rid of the hubs from either shaft devoid of disturbing the linked units.
Vertical Floating Shaft Kind
The decrease coupling includes a hardened crowned button inserted in the plate from the reduced hub. The complete floating assembly rest to the button. Optional building of your upper coupling will be a rigid hub within the floating shaft which has a flex half about the major.
Vertical Variety
This coupling has precisely the same horsepower, RPM and misalignment capabilities since the conventional couplings of corresponding sizes. A plate that has a hardened crowned button rests around the lower shaft which supports the bodyweight of your sleeve.
Insulated Sort
Use of a non-metallic material among flanges and all over the bolts prevents any stray currents from one shaft for the other.
Jordan Kind
Employed on Jordan machines and refiners, this style and design is related towards the slide sort coupling except the prolonged hub is split and secured 
towards the shaft using a bolt clamp. This permits swift axial adjustment in the Jordan shafts i this hub.
Engineered Shear Pin Type
Shear pin couplings are mainly utilized to limit transmitted torque to a redetermined load. THis in turn disconnectes the driver and driven shafts if torque exceeds the specified limits. These are primarily suited to protect tools when jams come about. Parts are re-useable after pins shear. The coupling will retain lubricant for a short period to permit products for being shut down.
Brakewheel and Brake Disc Sort
Replaceable brakewheel and brake disc piloted on the outside diameter of the standard sleeve and/or rigid hub. Offers a selection of applying braking work to the load or driving motor.
Double Engagement Half Gear Kind
The two inner and external teeth inside a single sleeve. Could be bolted to a rotating flywheel, shaft or drum to connect driver or driven machine that has a shaft extension. This coupling has exactly the same characteristics, ratings and misalignment capability as the typical group of couplings.
Rigid Alloy Steel FARR Type
Male/Female piloted rigid coupling coupling with keeper plates. This coupling is utilised when a rigid connection is required between the minimal speed shaft of the gearbox and also the head shaft of the conveyor, bucket elevator, mixer or any overhung or suspended load.
