Basic Description
Equipped with the zero leak bidirectional checking sole-noid valves, this power unit is made for the operation of two independent circuits. Which are respectively for the principal and subordinate platforms on the double scissors lift. Two cut-off valves are used for lowering the machine manually in case of electrical power loss. If additional independent circuits are expected for your application please get hold of us for availability.
Remark: 1. Please talk to our sales engineer to the different pump displacement, motor power or tank capacity.
two. CSA or UL certified motors can be found upon request.
Exclusive Notes
one. The AC motor is of S3 duty cycle, which might only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic parts concerned just before set up of the power unit.
3. Viscosity on the oil shoud be 15~46 cst,plus the oil ought to be clean and absolutely free of impurities,N46 hydraulic oil is encouraged.
four. The electrical power unit must be mounted vertically.
five. Check the oil degree while in the tank soon after the initial running in the electrical power unit.
6. Oil changing is required soon after the first one hundred operation hrs,afterwards as soon as every 3000 hrs.