Rugged development Design “MD” Buckets are most popular for general function elevators. Covering a broad variety of sizes from four to 20 inches lengthy, they can be used for ?ne 
and medium size materials this kind of as coal, cement, pulp, grain, ear corn, and so forth. They are broadly made use of for hefty abrasive materials such as sand, gravel, and stone. Reinforced front lips give Fashion “MD” Buckets a long wearing digging edge. Uniform wall thickness and robust corner reinforcement make them stronger than steel buckets on the similar gauge.They are really smoothly surfaced and have ends sloped inward at 6 degree angles to insure suitable ?lling and clean discharge. Available in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Combination, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are utilised with G1, G6, K1, or K2 style attach-ments once they can be found from the chain variety.
Capacities are for buckets ?lled towards the line XX (see diagram). The practical operating capacity will vary together with the loading ailments, angle of re-pose of your material being dealt with, and the incli-nation of the elevator.
Style “AC” ELEVATOR BUCKETS for handling cement, lime, and ?uffy components
Style “AC” Buckets give quick, thorough discharge of cement, lime, as well as other dry, ?uffy materials. Vent holes inside the bottom of each bucket release trapped air in ?lling and allow material to empty from bucket speedily and totally on discharge. Additionally to reinforcing lips, hooded backs reinforce “AC” Type Buckets. This characteristic permits closer bucket spacing and offers 30% higher carrying capability than other bucket styles with the same length. These sturdy buckets have an additional thickness of metal at dress in points for longer service. Available in Al-lied-Locke Malleable and Promal.
Style “AC” Buckets are generally utilized with hefty duty engineering chain such as Bushed Steel Chain with K2 and K3 design attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The useful operat-ing capability will fluctuate with loading circumstances, angle of repose with the materials remaining handled, as well as inclination on the elevator.
