DC MOTOR PUMP GROUP one
Basic Description
Consisting of a heavy duty DC motor as well as the CB1S gear pump, this pump motor group is definitely an great hydraulic power unit for mobile hydraulic equipments, such as auto carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Common Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump consists of a 4.5″ DC motor along with a CBSR gear pump that has a typical power up/gravity down circuit by using a relief valve, a check valve and a solenoid release valve.
Particular Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~68 cst, which must also be clean and totally free of impurities. N46 hydraulic oil is advised.
four. The power unit ought to be mounted horizontally.
5. The relief valve pressure is preset about 25% larger compared to the operating stress.
six. Flow handle valve for lowing velocity adjustment is available unpon request.