Why Coupling Grease?
Adequate lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively intended for gear coupling applications to boost coupling life while significantly reducing maintenance time. Its higher viscosity base oil and tackifier mix to keep the grease in location and prevent separation and it can be in total compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and manufactured which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces ordinarily found in couplings. Bearing or basic purpose greases have a tendency to separate and lose effectiveness as a result of higher centrifugal forces over the numerous elements at large rotational speeds. These large centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate from the gear tooth mesh location leading to premature coupling failure. Gear Coupling Grease is developed to highly resistant to centrifugal separation on the oil and thickener, which lets the lubricant to become applied for any rather extended period of time.
One of several tricks for the good results of Gear Coupling Grease is the variable consistency throughout the operating cycle of your application. The consistency of our gear coupling grease changes with the operating problems. Functioning in the lubricant underneath actual service ailments leads to the grease to grow to be semi-fluid, functionally solash lubricating the dress in surfaces in the coupling. Because the grease cools, it returns on the authentic consistency, thereby stopping leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Capabilities
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in location underneath higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust 
inhibitor additive package.
