We – EPG Group the most significant agricultural gearbox and pto factory in China with five different branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
The EPG Team variety of PTO shafts accessories consists of different sorts of yokes for the link of the tractor electrical power get-off with recessed thrust button and/or ball collar and/or ball collar for continual velocity joints, with the subsequent spline dimensions: 1”3/8 Z6 – 1”3/eight Z6 -1”3/8 Z21- 1”3/four Z6- 1”3/four Z20 Once the PTO has begun to electricity the attachment, steadily increase the throttle till you achieve the working speed. The standard working RPM (revolutions for each minute) for a tractor mounted PTO is 540 RPM, although there are tractor models that rev larger. Constantly refer to your distinct tractor model for guidelines prior to first-time use.travel shaft kancil 660 The king kutter pto yoke company push shaft universal joint replacement expense was pto shear bolt qualified pto travel shaft in which to purchase by pto shaft for john deere mx6 bush hog ISO9001:2008 maximum angle for pto shaft Quality pto shaft yoke pin Management mahindra pto shaft cost System. 2007 explorer sport trac 4×4 rear generate shaft
JMI Type Diaphragm Coupling(JB/T9147-1999)
Features
1.Unitized disc pack.
two.Infinite existence when appropriately aligned.
3.Torsionally rigid with out any back again lash.
4.No want for lubrication or maintenance.
5.No putting on parts and high resistance to severe environmental situations.
6.More substantial sizes are offered upon ask for.
·JMI Type Coupling Primary Dimension(JB/T9147-1999)
Kind | Nominal torque Tn |
Peak torque Tmax |
Max Velocity np |
Bore diameter d |
Bore Size | D | t | Torsional stiffness C |
Mass | Rotary inertia | |||
Y variety | J,J1,Z,Z1 sort | L(advise) | |||||||||||
L | L | L1 | |||||||||||
N·m | N·m | r·min-one | mm | N·m/rad | kg | kg·m2 | |||||||
JMI1 | twenty five | eighty | 6000 | 14 | 32 | – | Jone27 Z120 |
35 | ninety | eight.8 | 1×104 | 1 | .0007 |
16,18,19 | 42 | 30 | |||||||||||
20,22 | fifty two | 38 | |||||||||||
JMI2 | sixty three | a hundred and eighty | 5000 | 18,19 | forty two | 30 | forty five | one hundred | nine.5 | 1.4×10four | 2.3 | .001 | |
20,22,24 | 52 | 38 | |||||||||||
25 | sixty two | forty four | |||||||||||
JMI3 | one hundred | 315 | 5000 | 20,22,24 | fifty two | – | 38 | 50 | a hundred and twenty | eleven | 1.87×10four | 2.three | .0024 |
twenty five,28 | sixty two | forty four | |||||||||||
thirty | 82 | 60 | |||||||||||
JMI4 | 160 | 500 | 4500 | 24 | 52 | 38 | fifty five | a hundred thirty | twelve.5 | three.12×10four | 3.three | .0024 | |
25,28 | 62 | forty four | |||||||||||
thirty,32,35 | eighty two | sixty | |||||||||||
JMI5 | 250 | 710 | 4000 | 28 | 62 | 44 | sixty | one hundred fifty | 14 | 4.32×10four | 5.three | .0083 | |
thirty,32,35,38 | eighty two | 60 | |||||||||||
forty | 112 | eighty four | |||||||||||
JMI6 | 400 | 1120 | 3600 | 32,35,38 | 82 | eighty two | 60 | sixty five | one hundred seventy | fifteen.five | six.88×10four | 8.7 | .0159 |
forty,forty two,45,forty eight, fifty |
112 | 112 | 84 | ||||||||||
JMI7 | 630 | 1800 | 3000 | 40,42,forty five,forty eight, fifty,55,56 |
112 | 112 | 84 | 70 | 210 | 19 | ten.35×10four | fourteen.3 | .0432 |
sixty | 142 | – | 107 | ||||||||||
JMI8 | a thousand | 2500 | 2800 | 45,forty eight,fifty,fifty five, fifty six |
112 | 112 | 84 | eighty | 240 | 22.five | 16.11×10four | 22 | .0879 |
sixty,63,65,70 | 142 | 107 | |||||||||||
JMI9 | 1600 | 4000 | 2500 | 55,56 | 112 | 84 | eighty five | 260 | 24 | 26.17×10four | 29 | .1415 | |
60,sixty three,70,seventy one, seventy five |
142 | 107 | |||||||||||
eighty | 172 | 132 | |||||||||||
JMI10 | 2500 | 6300 | 2000 | sixty three,sixty five,70,71,75 | 142 | 142 | 107 | 90 | 280 | seventeen | seven.88×104 | fifty two | .2974 |
eighty,eighty five,90,95 | 172 | – | 132 | ||||||||||
JMI11 | 4000 | 9000 | 1800 | seventy five | 142 | 142 | 107 | ninety five | three hundred | 19.5 | ten.49×104 | sixty nine | .4782 |
eighty,eighty five,ninety,95 | 172 | 172 | 132 | ||||||||||
a hundred,a hundred and ten | 212 | – | 167 | ||||||||||
JMI12 | 6300 | 12500 | 1600 | ninety,95 | 172 | 132 | 120 | 340 | 23 | fourteen.07×104 | 94 | .8067 | |
a hundred,one hundred ten,one hundred twenty,one hundred twenty five | 212 | 167 | |||||||||||
JMI13 | 10000 | 18000 | 1400 | 100,110,120,125 | 212 | 167 | a hundred thirty five | 380 | 28 | 19.2×104 | 128 | one.7053 | |
a hundred thirty,140 | 252 | 202 | |||||||||||
JMI14 | 16000 | 28000 | 1200 | a hundred and twenty,125 | 212 | – | 167 | one hundred fifty |
420 | 31 | 30.0×10four | 184 | two.6832 |
130,a hundred and forty,one hundred fifty | 252 | 202 | |||||||||||
one hundred sixty | 302 | 242 | |||||||||||
JMI15 | 25000 | 40000 | 1120 | one hundred forty,a hundred and fifty | 252 | 202 | 180 | 480 | 37.5 | 47.46×104 | 262 | 4.8015 | |
a hundred and sixty,170,one hundred eighty | 302 | 242 | |||||||||||
JMI16 | 40000 | 56000 | 1000 | one hundred sixty,170,180 | 302 | 242 | two hundred |
560 | forty one | forty eight.09×10four | 384 | 9.4118 | |
190,200 | 352 | 282 | |||||||||||
JMI17 | 63000 | 80000 | 900 | one hundred ninety,two hundred,220 | 352 | 282 | 220 |
630 | forty seven | 10.13×104 | 561 | eighteen.3753 | |
240 | 410 | 330 | |||||||||||
JMI18 | one hundred thousand | 125000 | 800 | 220 | 352 | 282 | 250 |
710 | fifty four.five | 16.14×10four | 723 | 28.2033 | |
240,250,260 | 410 | 330 | |||||||||||
JMI19 | 160000 | 200000 | 710 | 250,260 | 410 | 330 | 280 | 800 | forty eight | seventy nine.8×104 | 1267 | sixty six.5813 | |
280,three hundred,320 | 470 | 380 |
Item demonstrate:
The use of first tools manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our organization and the listed substitution elements contained herein are not sponsored, accepted, or made by the OEM.